AMUT Group - Read More
04/12/2017
AMUT GROUP @ INTERPLASTICA

AMUT GROUP is a leading Italian reality that manufactures extrusion, recycling and thermoforming
custom-tailored lines for processing plastic materials.

Stand n.2.3 C15

21/11/2017
CHINESE DELEGATION MEETS AMUT TECHNOLOGY FOR GEOMEMBRANES

On the 3rd of November, AMUT GROUP hosted in its headquarter in Novara, Italy, a delegation consisting of top Chinese producers of Waterproofing Membranes in Bitumen and Polymers, with the intention to present the latest extrusion technologies in this field. AMUT GROUP is already worldwide leader, with few installations also in the Chinese territory.

12/10/2017
AMUT GROUP @ ECOMONDO

AMUT GROUP Recycling Division will present its state-of-the-art range of washing plants for the treatment of PET, HDPE and PP plastics and urban and industrial waste sorting equipment. The complex of the plants will be well represented by two typical machines: TURBO WASHER and BALLISTIC SEPARATOR - MPC MODEL.

10/10/2017
FROM GRANULES TO PACKED ROLLS: THE NEW ROLL PACK 4.0

AMUT DOLCI BIELLONI has decided to design and integrate in all the high speed lines our Roll Pack 4.0 Packaging System, which is now an accessory of our PRO-WIND winders and can pack any finished roll.

25/07/2017
DOUBLE TWIN PLANTS FOR POLYOLEFINS RECYCLING

The water-saving concept of the AMUT patented technologies are well known all around the world because of the treated water that can be re-used thanks to special recirculation circuits.

03/07/2017
NEW STACKING ROBOTS FOR ACF THERMOFORMING MACHINES

Speed, accuracy and reliability: these are the three key factors that distinguish the new stacking robot series supplied with the ACF thermoforming machines.

15/06/2017
BOOMING SALES IN SOUTH EAST ASIA

Chinaplas is the consolidation of our good reputation as manufacturer with 100% Italian technology and quality.

12/05/2017
A BRAND-NEW RECYCLING FACILITY INSTALLED IN MINYA GOVERNORATE

AMUT ECOTECH, Recycling Division of AMUT GROUP, has supplied for Minya Governorate a municipal solid waste recycling facility for the best management of recyclable materials. 

13/04/2017
NEW TELIA FLEXO PRESS

We will display the new Telia with the following features:
8 colours, 140 cm web width, Printing repeat up to 90 cm, Speed up to 500 m/min.

06/04/2017
BIG CAPACITY IN-LINE THERMOFORMING PLANT FOR ZEGAR CUPS

AMUT GROUP has recently supplied to P.T. Starplast Packaging Industry a complete in-line thermoforming plant to produce disposable PP cups for cold tea.

24/03/2017
AMUT COMI @ INTERPACK

AMUT COMI will exhibit an off-line thermoforming machine, model AMP 850-GP, complete of a mould for vending coffee cups.
The technology applied is single station.

21/02/2017
Double Stage EXCOL for Flexible Packaging

The web is produced with a Double-Stage Co-Extrusion Coating/Laminating Line, where paperboard is replaced by Bi-oriented & Primerized Film and where there is NO need of the Third Stage section.

07/02/2017
AMUT GROUP DEBUTS THE ACF SERIES DRIVEN BY EASY AT CHINAPLAS

AMUT COMI embraces also the South East Asian market presenting the ACF 820 model in operation during Chinaplas exhibition.

15/11/2016
AMUT GROUP @ K 2016 - REVIEW

K 2016 turned again into a great event for AMUT GROUP who has once more impressively catch the interest of hundreds international customers.

21/09/2016
AMUT GROUP @ K 2016 - PREVIEW

Booth n. A05 / Hall 16 – AMUT GROUP

Booth n. E40 / Hall 3 – AMUT COMI – Thermoforming Division

21/09/2016
AMUT GROUP @ K 2016 - PREVIEW

The “EXTRU-CONVERT” factory at the Fair.
At booth 16-A-05, AMUT DOLCI BIELLONI will show in operation an updated technology with clever solutions.

21/07/2016
NEW ACF 820 SERIES OF STEEL RULE CUTTING MACHINES

During K Show in Dusseldorf, AMUT COMI will present in operation a new generation of thermoforming machines, the ACF series. Hall 03 - Stand n. E40.

13/07/2016
TELIA 8 FSC HS - IMMEDIATE DELIVERY AT A SPECIAL PRICE

Telia FSC is the fastest system for job changeovers and the only one capable of granting less than 7 meters of waste material when changing two eight colours jobs.

27/06/2016
AMUT LINE FOR BIG SIZE MULTILAYER PPR PIPES WITH GLASS FIBER

Diameter up to 630 mm for the production of multilayer-pipes in PP with glass fiber: this is the line sold by AMUT to a primary European pipe producer dedicated to hot and cold water ducting for civil and industrial applications.

10/06/2016
A NEW GENERATION OF EXTRUDERS FOR BLOWN FILM LINES

The extruders range from a minimum diameter of 48 mm L/D35 up to 160 mm L/D35.
The performances are rather unique, the energy saving is around 20-25%.

11/05/2016
LIVE DEMOS AT DRUPA OF A NEW TELIA FSC HS

The Telia 8 colours includes a new and an improved version of the FSC system.
The unwinders/rewinders, totally new in the design, are shaftless.

28/04/2016
NEW HI-TECH COEX LINE

3 LAYER BLOWN FILM LINE FOR TECHNICAL FILMS. The output of the line can easily reach 600 Kg/hour in continuous production. Extreme tight gauge tolerance (below 2% for some kind of products).

11/04/2016
NEW BLOWN FILM COEX LINE IN LIVE DEMO

We inform all our customers that a NEW 2 METERS 3 LAYERS COEX LINE will be shown in operation in the second half of April.

01/04/2016
AMUT GROUP @ IFAT

AMUT GROUP welcome you at its booth n. C1.240 showing its range of solutions for the plastics materials – 100% Italian technology. Two machines will be exhibited:
1.DE-LABELLER, DLB 60 – 6000 KG/H OF PET BOTTLE CAPACITY
2.MOBILE BALLISTIC SEPARATOR - Model SBS 201

18/03/2016
AMUT FOR CORRUGATED PVC SHEET COMPLETE EXTRUSION LINE

The corrugated PVC sheet produced with AMUT lines can have different geometries and a thickness range from 0.8 up to 2.0 mm. The extruders are twinscrew type, series BA.

14/03/2016
COUNTER-ROTATING TWIN SCREW EXTRUDER FOR PVC PROCESSING

BEST PRICE
BA92 Model, cylinder Ø 92 mm, L/D=28 :1

Suitable for the production of:
Window Profile = up to 400 kg/h        Rigid PVC Pipe = up to 750 kg/h
Rigid PVC Foil = up to 600 kg/h         Rigid/Flexible PVC Pelletizing = up to 700 kg/h

24/02/2016
AMUT GROUP CONFIRMS ITS PRESENCE IN THE SOUTH-EASTERN ASIAN PANORAMA

AMUT GROUP does not miss the opportunity to exhibit at Propak Vietnam and Chinaplas - Shanghai: these fairs represent a good occasion to finalize some running contracts and to meet new potential customers in these booming countries.

05/02/2016
EXTRUSION LINE FOR MULTILAYER PIPES PRODUCTION

AMUT continues to improve the technology of lines producing PP pipes with glass fibres and mineral filler (calcium carbonate or barium sulphate). The pipes extruded with this technology are used for hot water piping and soundproofing drainage piping.

23/12/2015
AMUT PARTNER OF THE ITALIAN TECHNOLOGY AWARDS PROJECT

“We are very glad to open the door to international worthy students and sharing our company reality to them. We’re always content to help to reduce the gap between university study-experience and practical manufacturing trial” .

10/12/2015
AMUT IMPROVES WATERPROOFING MEMBRANES PERFORMANCES

AMUT manufactures extrusion lines producing waterproofing membranes capable to process different thermoplastic materials, such as F/PVC, TPO, TPE.

10/11/2015
A NEW DIE CONCEPT ON AMUT DOLCI BIELLONI

On all our 5-7-9 layers lines, either for technical films or for barrier films, we include: the pancake stackable die.

05/11/2015
INVITATION TO A LIVE DEMONSTRATION OF INLINE DOUBLE STAGE EXTRUSION COATING LAMINATING

Dow and AMUT DOLCI BIELLONI for a joint open house in Biassono, Italy.

02/11/2015
NOVEMBER: THE OPEN HOUSE MONTH

THE ACP NEW WINDER RUNNING AT OVER 750 METER/MINUTE SPEED ON A 2 METER STRETCH FILM LINE WITH 6 EXTRUDERS

25/10/2015
7 LAYERS - 2 METERS STRETCH FILM LINE - NOW AVAILABLE FOR DELIVERY IN 60 DAYS

The NET PRODUCTION of the line is 1400 Kg/hour (finished rolls).
The PRODUCTION SPEED is 600 m/min.

17/10/2015
WHY CHOOSE A TELIA GEARLESS FLEXOPRESS?

- because TELIA prints top quality at higher speed
- because TELIA is the fastest flexo press in job changes-

15/10/2015
OPEN HOUSE - IN LINE THERMOFORMING TECHNOLOGIES

In-Line thermoforming plant - production up to 26.000 plates/h

AMP850W-GP thermoforming machine for 110.000 cups/h.

14/10/2015
NEW DEVELOPMENTS IN MULTILAYER BLOWN FILM TECHNOLOGY

The 3-layer co-extrusion technology is now commonly accepted by the market because it has been proven that, better mechanical properties on the film are achieved by splitting the melt into 3 layers.

08/10/2015
QUALITY AND HIGH SPEED ON THE NEW AMUT DOLCI WINDERS FOR STRETCH FILM

We are proud to announce that the new 2-station winders ACP 2000 and ACP 3000 have achieved remarkable and unique results in production. 

23/09/2015
THE AMUT DOLCI BIELLONI PERMANENT “SHOW ROOM”

We decided this important investment in order to put the lines at full disposal of our Customers to run specific trials and to test new products and film structures.

07/09/2015
EXTRUSION COATING AND LAMINATING LINE IN OPEN HOUSE

By the end of September, it will be shown in operation in our Show Room a:
DOUBLE STAGE EXTRUSION COATING LAMINATING LINE

1800 mm width - 35 mt lenght

06/09/2015
AMUT GROUP BOOSTS TECHNICAL SERVICE IN VIETNAM AND INDONESIA

Since August 2015, AMUT GROUP confirms the establishment of new technical service points in Vietnam and Indonesia boosting and consolidating a complete onsite support to the existing and potential customers.

03/08/2015
UNIFI SELECTS AMUT FOR PET BOTTLES PROCESSING PLANT

Unifi Inc. selected equipment makers AMUT SpA to provide the technology for a $25 million expansion that will increase its capacity to turn PET bottles into recycled fibers for apparel and automotive products.
The investment is being made at Unifi’s facility in Reidsville, N.C.

23/07/2015
AMUT SOLAR LINES PRODUCING EVA FOILS

EVA, Ethylene-Vinyl-Acetate, is the type of material produced with AMUT’s extrusion foil line and it is especially reserved for the production of solar-photovoltaic panels.

02/07/2015
OPEN HOUSE - IN LINE THERMOFORMING PLANT FOR PP CUPS

Model: AMP 850 S-GP
Material : PP
Output : Cup flat lip
Capacity : 220 cc / 7,7 oz
Cup weight : 2.8 gr
Line Production : 90.000 cups/h

19/06/2015
AMUT DOLCI BIELLONI AND A NEW GENERATION OF STRETCH FILM LINES

The long-time experience of AMUT in the production of extruders has marked a sweeping change in the conventional extrusion concept of stretch film cast lines manufacturing: during the last Open House in May, the customers have testified a constant production speed of 750 m/min. 

15/06/2015
AMUT AND UNIVERSITY OF PISA WORK TOGETHER ON RESEARCH PROJECTS

The University of Pisa, Engineering Department, has chosen AMUT as partner to cooperate on four research projects sponsored by the European Community, specific on dealing the study of plastic materials processing. 

02/05/2015
OPEN HOUSE AT AMUT DOLCI BIELLONI PREMISES

During the Plast fair that will take place from the 5th to the 9th of May in Milan, will be show the progress of AMUT DOLCI BIELLONI technologies:  three cast, one blown film line and a flexo gearless machine in operation in Biassono factory, which is only 25 minutes far from the fairground.

02/05/2015
NEW COEX BLOWN FILM LINE FOR THE PRODUCTION OF HI-TEC FILMS, COLLATION SHRINK FILM, STRETCH HOOD, FILM FOR LAMINATION AND PACKAGING

AMUT DOLCI BIELLONI will show in Open House during the next PLAST Exhibition (Milano 5 - 9 May 2015) its most updated Blown Film line for the production of quality films designed for an output of 750 Kg/hour.

02/05/2015
A NEW TECHNOLOGY FOR THE PRODUCTION OF “SUPERPOWER” STRETCH FILM 7-LAYER 2 METERS STRETCH FILM LINE WITH 6 EXTRUDERS

The line has been developed for the production of rolls of “SUPERPOWER” film for high speed wrapping machines, but can also be used for the production of hand rolls in very thin gauges (6 my) and 200 m in length. 

02/05/2015
SOMETHING NEW ON THE FLEXO GEARLESS MARKET

During the Plast show in Milano (5-9-May 2015) AMUT DOLCI BIELLONI will introduce the Telia FSC 10 colour flexo gearless press and will organize live demos on how the machine « repeats » the printing pressures (when changing a job) without any electronic additional equipment. 

02/05/2015
THE NEW “ALL-IN-ONE” 1500 mm STRETCH FILM LINE

During the next international Plast show in Milano (5 to 9 May) we will show in operation a new stretch film line that includes the “Multiwind” winder for the production of jumbo, machine and hand rolls. 

28/04/2015
JOINED TECHNOLGIES FOR POLYURETHANE-INSULATED PIPES PRODUCTION LINE

During Plast Exhibition in Milan, SAIP will be guest at AMUT GROUP’s booth to seal the recent technical collaboration in manufacturing lines for the production of PIPE IN PIPE technology.

11/03/2015
PLAST 2015_PREVIEW

AMUT GROUP is ready for the triennial Plast Exhibition held in Milan with an impressive booth of more than 800 m² to officialise in the European scenario the new settled AMUT DOLCI BIELLONI and to display the latest developments in extrusion, recycling and thermoforming field.

All visitors will see the new model of thermoforming machine AMP850W-GP in operation.

25/02/2015
DOLCI BIELLONI JOINS THE AMUT GROUP OWNERSHIP

“Taking over DOLCI BIELLONI company is a brilliant success for the future of AMUT GROUP: together we boost our leading role in the international scenario. Synergies enhance our strengths” – says Mauro Drappo, CEO of AMUT GROUP.

11/02/2015
AMUT GROUP SHOWCASES A THERMOFORMING MACHINE AT CHINAPLAS

At Chinaplas AMUT GROUP presents in operation the VPK-C84 automatic thermoforming machine producing rigid packaging, such as trays, punnets, containers. 

13/01/2015
AMUT RACES FOR NATIONAL CHAMPION

 “The European Business Awards is one of the most highly regarded business competitions in the world attracting significant media interest and involving several successfully companies. We are glad to have passed the entry selection and can progress through the further steps” – says Mr Piergianni Milani, President of AMUT.

10/12/2014
NEW PERSPECTIVES FOR IN-LINE THERMOFORMING TECHNOLGIES

AMUT has successfully tested and delivered to a large North American producer a complete in-line thermoforming plant for the production of disposable cups (size required by the USA and Canadian markets).

29/10/2014
AMUT AND AMUT ECOTECH JOINT PLAYERS TO SUPPLY RECYCLING FACILITIES

AMUT Recycling Division, innovative manufacturer of plastics washing plants, together with AMUT ECOTECH, high expert of sorting and separation technology, represent an instrumental player in the waste processing systems field. AMUT and AMUT ECOTECH become a sole reference to supply recycling facilities.

06/10/2014
4-METER HDPE DIMPLED SHEET EXTRUSION LINE BRANDED AMUT GROUP

The HDPE dimpled sheet is largely used to protect and provide drainage for the underground walls and it is the latest solution for the proper protection and ventilation of the waterproofing mantle between cement foundations and ground. Furthermore, its versatility makes it essential for the realization of buildings in zones where water presence is particularly high.

08/09/2014
AMUT SUPPLIES TO PETSTAR THE LARGEST PLANT OF LATIN AMERICA

C.Lic.Enrique Peña Nieto, the President of Mexico, the Board of Directors of Petstar and Coca-Cola Management participated in the opening ceremony held at Pet Star premises at Toluca, Mexico, on the 16th of July. The latest PET wash plant installed by AMUT has been shown to the large number of guests including top level managers involved in PET recycling business.

25/07/2014
FOIL IS GETTING THINNER WITH AMUT THERMOFORMING MACHINES

AMUT has lately supplied to Poly Er, one of the biggest Russian thermoformers, the first in line thermoforming machine producing disposable plates (in HIPS + GPPS material) with a weight of only 3 gr.

19/06/2014
CARBON LITE CLINCHES AMUT PET WASH TECHNOLOGIES

AMUT is pleased to have been selected as an integral part of the new project of CarbonLITE Recycling LLC (an HCP company): a 20.000 m² plant will process post-consumer bottles into pcrPET pellets that can be used to make new bottles.

04/06/2014
AMUT, ITALIAN MANUFACTURER OF EXTRUSION LINES FOR PIPES

Since 1958 AMUT, headquartered in Novara - Italy, is a global leader in the plastics extrusion field and manufactures different lines configurations to extrude pipes, offering solutions for several materials and diameters.

22/04/2014
AMUT COMI: RELIABLE SUPPLIER OF THERMOFORMING MACHINES

AMUT COMI, member of AMUT GROUP, is a 100% Italian company result of the cooperation between AMUT and COMI merging their technological know-how in thermoforming field.

10/04/2014
AMUT GROUP BELIEVES IN ARGENTINEAN MARKET

Strongly trusting on South America continuous growth, this year also, AMUT GROUP will be exhibitor at Argenplas in Buenos Aires, showing its range of products and presenting its recent structure as Group.

08/04/2014
AMUT MINI PRF SYSTEM TO IMPROVE RECYCLED PET QUALITY

AMUT Recycling Division has successfully started up a new MINI PRF at Wellman’s in Johnsonville, South Carolina, with a capacity of 6÷7 tons/h (14,000 lbs/h).

19/03/2014
AMUT ECOTECH shows the first mobile ballistic separator

The AMUT ballistic separator is the first model mounted on flat-bed trailer, feature which represents a great improvement because it enables a complete flexibility: SBS 201 can be added or easy-fit to every existing lines.

17/03/2014
AMUT: MULTIPURPOSE EXTRUSION SOLUTIONS

AMUT GROUP, headquartered in Novara, Italy, is a global leader in plastics extrusion field, since 1958. Starting with the production of different kind of extruders, the company has continued its technological improvement up to manufacturing complete lines.

04/03/2014
AMUT GROUP MACHINES SATISFY VIETNAM MARKET EXPECTATIONS

After supplying some machines throughout Asia, AMUT GROUP has also gained confidence in Vietnam market, consolidating its strength with the full time presence of the Sales Manager Mr Andrea Peretto, in charge of the area.

15/01/2014
VIETNAM CUSTOMERS TRUST THE AMUT COMI QUALITY

AMP 630-GP second generation is the model set up and destined to be the first, for typology, extrusion and termoforming plant “in line” with high capacity installed into the south-Vietnamese market.

Subscribe our newsletter

Contact us

Follow us on

©2017 AMUT S.p.a.. All rights reserved.
Cap. Soc. € 13.128.572 Int. Versato - R.E.A. Novara 211294 - Reg. Imprese Novara – Cod. ISO IT – C.F. – P.IVA 02035500038